Reinforced Geotextile IGTC

This product is an inseparable combination of nonwoven and woven geotextiles, made from 350 to 1100 grams per square meter and up to 6 meters wide, made of polyester, polypropylene or polyamide fibers, and is used when, in addition to high tensile strength and low elongation, hole size is required.

SKU: Reinforced Geotextile Categories: , Tags: , ,

Additional Information

There are various applications for woven geotextile, but it is mostly used in the field of soil erosion control, soil stability and drainage.

In the manufacture of woven geotextile fabric, a method similar to the manufacture of other industrial fabrics is used to make a strong woven fabric. The fabrics used in the manufacture of woven geotextile are very lightweight and strong, so moisture will not pass through them quickly or effectively. Woven geotextile fabrics also have tensile strength and have a plastic appearance so that you can see the pattern of the weave on their surface.

As you know, woven geotextiles are produced using weaving. In this process, the warp and weft yarns woven vertically and horizontally give woven geotextiles a high load capacity, which makes woven geotextiles very suitable for applications such as airport runway construction.

Woven Geotextile Weave

The weaving of yarns in woven geotextile has two meanings, which means that these geotextiles are not very porous, which makes them not very suitable for civil engineering projects where drainage is very important. But this feature makes them ideal for some civil engineering erosion control projects where water must be transferred from the surface without being drawn down through the soil below. Woven geotextile is an affordable solution for a variety of applications, including:

  • Stabilizing construction entrances and staging areas.
  • Bridging soft soils.
  • Separating different soils.
  • Reinforced soil structure.
  • Coastal erosion control.

Woven geotextiles are today one of the most widely used types of geotextiles, which are used in various industries such as road construction, railways, construction of defensive barriers in banks and construction of runways in airports.

Features of Woven Geotextile

  • Woven geotextile is very lightweight, so it is easier to transport and move on site.
  • The costs of transportation and labor are much lower, so they are very affordable.
  • Woven geotextile has high tear strength.
  • Woven geotextiles also have high electrical resistance.

Technical Specifications

Mass per total unit



ASTM D5261

Mass per unit of nonwoven geotextile



Grab Tensile(MD)



ASTM D4632

Elongation Grab(MD)



ASTM D4632

Grab Tensile(CD)



ASTM D4632

Elongation Grab(CD)



ASTM D4632




ASTM D5199




ASTM D6241

Installation and implementation steps

To install geotextiles properly, engineering instructions should be considered:

  • The desired surface should be cleaned of weeds, extra soil, sharp and sharp stones, etc.
  • All cracks and seams and soil highs and lows should be taken and corrected.
  • The woven geotextile fabric should be spread out with minimal wrinkles and the seams should be taken with pins, nails, industrial welding machines, etc
  • The use of adhesive coating between 1-1.351/M2 of remaining asphalt should be done evenly.
  • In the end, a hot coating or asphalt should be poured over them.


Reinforced Geotextile IGTC

Reinforced Geotextile KPL

To order or free consultation, geosynthetic products of KPL Co., contact us.


There are no reviews yet.

Be the first to review “Reinforced Geotextile IGTC”